User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            TA11 Overlab Gain Sub
DATE:                  16-Jun-97
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       3
NUMBER OF LINES:       34
CONFIGURATION:         Fluke 5700A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  MATH         mem1 = m[1]
  1.002  DISP         Connect the 5700 HI/LO OUTPUT to UUT channel [MEM1].
  1.003  IEEE         SS5;
  1.004  IEEE         SP;
  1.005  MESS         Adjust the stimulus until the trace has deflected 120mm
  1.006  MESS         (24 major divisions) to the left on the printout.
  1.007  5700         300.00mV                                          N  2W
  1.008  IEEE         HLT;
  1.009  MATH         mem1 = 300
  1.010  MEME
  1.011  MEMC         mV             1.5%
  2.001  MATH         mem1 = m[1]
  2.002  IEEE         #[MEM1]:ATTN=100
  2.003  IEEE         #[MEM1]:S=20;
  2.004  MESS         Adjust the stimulus until the trace has deflected 125mm
  2.005  MESS         (25 major divisions) to the left on the printout.
  2.006  5700         250.00V                                           N  2W
  2.007  IEEE         HLT;
  2.008  MATH         mem1 = 250
  2.009  MEME
  2.010  MEMC         mV             1.5%
  3.001  END